BMP180 Barometric Pressure Sensor Module  GY68

KShs500

  • BMP180 module
  • 1.8V to 3.6 V Supply Voltage
  • Low power consumption – 0.5 uA at 1 Hz
  • I2C interface
  • Max I2C Speed of 3.5 Mhz
  • Very low noise – up to 0.02hPa (17 cm)
  • Full calibrated
  • Pressure Range of 300 hPa to 1100hPa (+9000 m to -500 m)
  • Weight is approx. 1.18 g
  • Size is 21 mm x 18 mm

Description

BMP180 Barometric Pressure Sensor Module For Arduino. Measuring the absolute pressure of the environment using a digital barometer such as this has some interesting applications. By converting the pressure measured into altitude, you have a reliable sensor for determining the height of your robot, plane.

Using a sensor as capable as the BMP180 you can achieve accuracy of 1m, with noise of only 17cm in ultra high resolution noise. The device will operate at only 0.3uA meaning low current draw for battery powered applications.

The BMP180 comes fully calibrated and ready to use. As the device operates over I2C we’ve added optional I2C pull ups that can be enabled using the PU (pull up) jumper on the board for your convenience and ease during breadboarding.

Using I2C, the device provides pressure and temperature as 16bit values, which are used along with calibration data within the device are used to provide a temperature compensated altitude calculation.

 

Features of BMP180 Barometric

  • BMP180 module
  • 1.8V to 3.6 V Supply Voltage
  • Low power consumption – 0.5 uA at 1 Hz
  • I2C interface
  • Max I2C Speed of 3.5 Mhz
  • Very low noise – up to 0.02hPa (17 cm)
  • Full calibrated
  • Pressure Range of 300 hPa to 1100hPa (+9000 m to -500 m)
  • Weight is approx. 1.18 g
  • Size is 21 mm x 18 mm

Reviews

There are no reviews yet.

Be the first to review “BMP180 Barometric Pressure Sensor Module  GY68”

Your email address will not be published. Required fields are marked *