Buck Converter 9A 300W 5-40V To 1.2-35V Power module
KShs1,500
- Fixed turn lamp current is 0.1 times the current value ( Used to identify whether the battery is fully charged When charging).
- Made from a dedicated benchmark IC and high precision current sensing resistor.
- Particularly suitable for LED driver.
- High output current, the max output current can reach 8 A.
- Four high frequency capacitance, can lower output ripple, enhance the work stabilization.
- Double heat sink design. MOS schottky diode and independent heat sink, which heat dissipation is good, and won’t affect each other.
- Using large size Sendust Core and double pure copper wiring, this improve working efficiency.
- 3296 multi turn potentiometer, high accuracy voltage and current regulation, good stability.
- Double color lamp, working condition be clear at a glance
- Voltage and current are adjustable, switch effect is good.
Out of stock
Description
Buck Converter 9A 300W 5-40 V To 1.2 – 35 V Power module
Features of Buck Converter 9A 300W 5 – 40 V
- Dimensions: 65 (length) * 47 (width) * 23.5 (height) mm
- Non isolated step down constant current,
- Constant charging voltage
- Input voltage of 7 – 32 V DC
- Adjustable output voltage of DC 0.8 – 28 V continuously adjustable
- Fixed output voltage between 0.8 – 28 V DC
- Output Current of 8 A (when power tube’s temperature exceeds 65 degrees)
- Constant current range of 0.2 – 8 A
- Lowest pressure of 1 V
- Maximum power output of 300 W
- 95% conversion efficiency
- Operating frequency of 300 KHZ
- Output ripple of 20 M bandwidth
- Input 24 V output 12 V 5 A ripple around 50 mV (Excluding noise)
- Output short circuit protection with constant current
- Wiring: Terminal
- No load current: Typical 20 mA (24 V switch 12 V)
- Load regulation: ± 1 %
- Voltage regulation: ± 1 %
- Dynamic response speed: 5 % 200 uS
- Dual color indicator, charging indicator light is red, the green light means fully charged ( No load is green )
Features:
- Fixed turn lamp current is 0.1 times the current value ( Used to identify whether the battery is fully charged When charging).
- Made from a dedicated benchmark IC and high precision current sensing resistor.
- Particularly suitable for LED driver.
- High output current, the max output current can reach 8 A.
- Four high frequency capacitance, can lower output ripple, enhance the work stabilization.
- Double heat sink design. MOS schottky diode and independent heat sink, which heat dissipation is good, and won’t affect each other.
- Using large size Sendust Core and double pure copper wiring, this improve working efficiency.
- 3296 multi turn potentiometer, high accuracy voltage and current regulation, good stability.
- Double color lamp, working condition be clear at a glance
- Voltage and current are adjustable, switch effect is good.
Applications:
- High power LED driver.
- Lithium battery charge.
- Vehicle-mounted power supply.
- Low voltage system power supply.
- 6 V, 12 V, 14 V, 24 V battery charge.
- Onboard laptop power supply.
- Regulated power supply.
- Low voltage power supply system.
Ken –
N/A