ATTINY13A Microcontroller 8-Bit Microcontroller

Features of ATTINY13A Microcontroller:

High Performance, Low Power AVR 8-Bit Microcontroller •

Advanced RISC Architecture

• 120 Powerful Instructions – Most Single Clock Cycle Execution – 32 x 8 General Purpose Working Registers
• Fully Static Operation
• Up to 20 MIPS Throughput at 20 MHz

High Endurance Non-volatile Memory segment

• 1K Bytes of In-System Self-programmable Flash program memory
• 64 Bytes EEPROM
• 64 Bytes Internal SRAM
• Write/Erase Cycles of 10,000 Flash/100,000 EEPROM
• Data retention of 20 Years at 85 °C/100 Years at 25 °C
• Programming Lock for Self-Programming Flash & EEPROM Data Security

Peripheral Features

• One 8-bit Timer/Counter with Prescaler and Two PWM Channels – 4-channel, 10-bit ADC with Internal Voltage Reference
• Programmable Watchdog Timer with Separate On-chip Oscillator – On-chip Analog Comparator

Special Microcontroller Features

• debugWIRE On-chip Debug System
• In-System Programmable via SPI Port
• External and Internal Interrupt Sources
• Low Power Idle, ADC Noise Reduction, and Power-down Modes
• Enhanced Power-on Reset Circuit
• Programmable Brown-out Detection Circuit with Software Disable Function – Internal Calibrated Oscillator

I/O and Packages

• 8-pin PDIP/SOIC with Six Programmable I/O Lines – 10-pad MLF with Six Programmable I/O Lines
• 20-pad MLF with Six Programmable I/O Lines

Operating Voltage: – 1.8 – 5.5 V

Speed Grade:

• 0–4 MHz @ 1.8 – 5.5 V – 0–10 MHz @ 2.7 – 5.5 V – 0–20 MHz @ 4.5 – 5.5 V

Industrial Temperature Range

Low Power Consumption

• Active Mode of 190 μA at 1.8 V and 1 MHz
• Idle Mode of 24 μA at 1.8 V and 1 MHz

8-bit Microcontroller with 1K Bytes In-System Programmable Flash

Datasheet