Load Cell Weighing Sensor Half-bridge 50 Kg

Description

Load Cell Weighing Sensor Half-bridge 50 Kg. It has an internal resistance of 1000 Ohm. Mainly half-bridge strain gauge load cell. It can weigh up to 50 If. Offers a good half-bridge structure.

When measuring, the correct force is applied to the outer side of the strain E-shaped beam portion of the sensor (i.e., a strain gauge affixed to the intermediate, adhesive coating with white beam arms) and the outer edges to form a shear force in the opposite direction, i.e., middle strain beam bending necessary changes can occur under stress, strain beam side by another force should not be a barrier.

Features of Load Cell Weighing Sensor

• Internal 1000Ohm half-bridge strain gauge load cell, the range is 50kg, half-bridge structure.
• Widely used in hopper scales, platform scales, platform balance, belt scales, and other electronic weighing devices.
• widely used in weight scales. When the half-bridge is being stretched, it sends the signal via the red signal wire.
• Alloy Steel wired weighing load cell, high accuracy, simple structure, simple installation.

Specifications

• Capacity kg 40-50
• Comprehensive
• Error mv/v 0.05
• Output Sensitivity mv/v 1.0±0.1
• Nonlinearity %FS 0.03
• Repeatability %FS 0.03
• Hysteresis %FS 0.03
• Creep (3min)%FS 0.03
• Zero Drift (1min)%FS 0.03
• Temp. Effect on Zero %FS/10℃ 1
• Temp. Effect on Output %FS/10℃ 0.05
• Zero Output mV/V ±0.1
• Input Resistance Ω 1000±20
• Output Resistance Ω 1000±20
• Insulation
• Resistance MΩ ≥5000
• Excitation Voltage V ≤10
• Operation Temp. Range ℃ 0–+50
• Overload Capacity %FS 150

Datasheet